Home › Hot Water Repairs and Replacement in Mulgrave

Hot water · Mulgrave VIC 3170

Hot Water Repairs and Replacement in Mulgrave

No hot water, a cylinder leaking from the base or a relief valve that will not stop dripping? We repair and replace electric and heat pump hot water systems across Mulgrave. Call 03 9088 4762.

Urgent calls answered · Mulgrave VIC 3170

Plumber checking a valve on an electric hot water cylinder in a laundry with an adjustable wrench
Licensed and insuredVictorian-licensed plumbers with public liability cover. Compliance certificates for regulated work.
Price agreed firstWe find the cause, explain it and agree the cost with you before a tool comes out.
Homes and businessesHouses, units and townhouses, plus offices, warehouses and shops in the Mulgrave precinct.
Local every dayBased in Mulgrave 3170, minutes from Waverley Park, Wheelers Hill, Springvale and Noble Park North.

Hot water problems we fix

  • No hot water at all.
  • Water that is only lukewarm, or runs cold after a short shower.
  • Water dripping or running from the pressure and temperature relief valve.
  • Water pooling under or around the cylinder.
  • The hot water system tripping the safety switch or the power to the house.
  • Rusty or discoloured hot water.
  • Strange noises, rumbling or banging from the tank.
  • Hot water that is too hot, or temperature that swings up and down.
  • Heat pump units that run but do not heat, or show a fault code.

The systems we work on

Mulgrave homes use a mix of hot water systems. We work on:

  • Electric storage cylinders, the most common type in older Mulgrave homes, often in the laundry, a cupboard or outside against a wall.
  • Heat pump systems, increasingly common in Waverley Park and in homes that have upgraded in recent years.
  • Solar-boosted electric systems, with roof collectors or panels and an electric booster element.
  • Commercial electric units feeding washrooms and staff kitchens in offices and warehouses.

We do not install or service systems that run on anything other than electricity. If your system is not electric, we can talk to you about switching to an efficient electric or heat pump unit.

Common causes and what we do about them

No hot water

On an electric cylinder, the usual suspects are a failed heating element, a faulty thermostat or a tripped over-temperature cut-out. We check the power supply first, then test the element and thermostat. Both can be replaced, and if the tank itself is in good condition, that is often the most sensible repair.

On a heat pump, a lack of hot water can be caused by a fault in the compressor, fan, sensor or control board, or by the unit simply not having enough time to recover after heavy use. We read any fault codes, check the airflow and refrigeration cycle as far as a plumber can, and arrange specialist parts where needed.

Lukewarm water

If water is warm but not hot, the element or thermostat may be partly failing, the tempering valve that blends hot and cold water before it reaches bathrooms may have failed, or the system may be too small for the household. A cylinder that suited two people may struggle with a family of five. We test each part and explain whether a repair or a bigger system makes more sense.

Relief valve dripping

The pressure and temperature relief valve is a safety device. A small amount of discharge while the water heats is normal, because heated water expands. Constant dripping or a steady stream is not. Causes include a worn valve, mains pressure that is too high or a failed expansion control valve on the cold inlet. We test the pressure, replace valves as needed and fit a pressure limiting valve if the mains pressure is high, which is common in parts of Waverley Park.

Water leaking from the tank

If water is coming from the tank body itself, the inner lining has failed and rust has eaten through. That cannot be repaired. The cylinder must be replaced, and the sooner the better, because a failing tank can let go suddenly. Turn off the power to the unit and close the cold inlet valve, then call us.

If the leak is from a fitting, valve or pipe connection, it can usually be fixed.

Power tripping

An element that has broken down inside the tank can cause the safety switch to trip. This needs testing before the system is switched back on. We isolate the unit, test the element and wiring connections and replace the faulty part.

Rusty or smelly water

Discoloured water from the hot taps can mean the sacrificial anode inside the tank is used up and the tank is starting to corrode. Replacing the anode early can extend the tank's life. A rotten egg smell is often a reaction between the anode and certain water conditions, which can be solved by changing the anode type.

Repair or replace?

We always look at repair first, but it is not always the best value. As a guide:

  • If the cylinder is under about eight to ten years old, the tank is sound and the fault is a part such as an element, thermostat or valve, repair usually makes sense.
  • If the cylinder is older, has been repaired several times, shows rust or is leaking from the tank, replacement is usually the better choice.
  • If the household has grown or hot water keeps running out, a larger or more efficient system may solve the problem permanently.

We give you an honest view and a firm price for each option.

Replacing a hot water system

When replacement is needed, we help you pick the right system. We consider how many people live in the home, when they use hot water, where the system will go, the available electrical supply and whether you have solar panels.

Like-for-like electric

Replacing an electric storage cylinder with a new one of similar size is quick, often done the same day, and suits many homes. We can also adjust the size up or down if your needs have changed.

Heat pump

A heat pump uses a compressor and fan to move heat from the air into the water. It uses much less electricity than a standard element, which can significantly reduce running costs. Heat pumps suit most Mulgrave homes, but placement matters: they need airflow, and their fans make a low hum, so we site them away from bedroom windows and neighbours' living areas where possible. Victorian government rebates may apply. See our heat pump hot water page for more.

What a replacement involves

  1. We confirm the right size and type with you and agree the price.
  2. We isolate water and power, drain and disconnect the old system.
  3. We install the new system on a suitable base, with new valves, including a tempering valve where required to keep bathroom outlets at a safe temperature.
  4. We connect water and arrange the electrical connection.
  5. We fill, test and commission the system, check for leaks and explain how it works.
  6. We remove the old cylinder and packaging, and provide a compliance certificate.

Hot water safety

Hot water must be stored hot enough to prevent bacteria such as Legionella from growing, usually at least 60 degrees Celsius. But water at that temperature can scald, especially young children and older people. That is why bathrooms in Victoria must be supplied at a lower temperature, controlled by a tempering valve or thermostatic mixer. These valves wear and should be checked. If your bathroom water seems much hotter or colder than it used to, call us.

Hot water for businesses

Washrooms, kitchens and staff areas in the Mulgrave business precinct rely on hot water. We service, repair and replace commercial electric units and point-of-use heaters, and fit tempering valves to keep washroom outlets safe. We can schedule replacement out of hours so staff are not left without hot water.

Looking after your hot water system

  • Test the relief valve lever gently every six months, following the instructions on the label, to make sure it is not seized. If water does not flow, or does not stop when released, call us.
  • Have the system inspected and the anode checked every few years, especially in older tanks.
  • Watch for drips, rust spots or damp around the base.
  • Keep the area around a heat pump clear of plants and storage so air can flow.
  • If you are going away for more than a few days, consider switching the unit off at the switchboard, then switching it back on a day before you return.

A typical Mulgrave hot water call

A family near Brandon Park rings on a weekday morning: the showers went cold overnight and the safety switch keeps tripping when the hot water circuit is turned on. We arrive, isolate the unit and test the element, which has broken down inside its sheath. The cylinder is twelve years old, with rust stains forming around the base fittings. We explain that a new element would get them through, but the tank is near the end of its life and an element replacement would be money spent on a cylinder that might fail within a year or two. They choose a new heat pump. The old cylinder is replaced the next morning with the new unit sited on the side path away from the bedroom windows, and the family qualify for a rebate.

Hot water across the area

We repair and replace hot water systems throughout Mulgrave and Waverley Park, and in Wheelers Hill, Glen Waverley, Clayton, Springvale, Noble Park North, Dandenong North and Rowville. Call 03 9088 4762. ## Choosing a new system: questions we ask

  • How many people live in the home, and does that change with visitors or grown-up children?
  • When is hot water used most: mornings, evenings or spread through the day?
  • Do you have rooftop solar, or plan to add it?
  • Where is the current system, and is there a better spot nearby?
  • Are you on a time-of-use or off-peak tariff?
  • How long do you plan to stay in the home?

The answers tell us whether a like-for-like cylinder, a larger one or a heat pump is the best fit, and we give you a firm price for each.

Hot water in units and smaller homes

Units and townhouses often have compact cylinders in cupboards, laundries or on balconies, where access and space are tight. We plan replacements around those constraints, choose units that fit the space and the household, and make sure relief valve drains and safe trays discharge properly so a future leak does not damage the floor below or the neighbouring unit.

If a safe tray is fitted under an indoor cylinder, check now and then that it is dry. Water in the tray is an early warning that the tank or a fitting has started to leak, and it is far cheaper to deal with then.

Local knowledge

What we see in Mulgrave properties

Mulgrave grew quickly from the late 1960s, and most streets are lined with brick-veneer houses from the 1970s and 1980s, many now sharing their blocks with two or three newer units. Underneath them is heavy, reactive clay that swells in wet winters and shrinks in dry summers, which is hard on old earthenware sewer joints and on stormwater pipes laid before flexible fittings were common. Off Wellington Road in the north-east, the Waverley Park estate is far newer, with plastic pipe, tempering valves and pressure that often needs a limiting valve. Then there is the business precinct along Wellington and Ferntree Gully Roads, where offices, warehouses and food businesses need backflow testing and washroom work. Knowing which of those you are dealing with before we arrive is half the job.

What you get

Included with every hot water repairs and replacement visit

Diagnosis
Camera, gauge, thermal imager or meter test chosen to suit the fault, with the result shown to you
Price
Agreed before any work, and written down for bigger jobs
Who turns up
A licensed, insured Victorian plumber who works in Mulgrave every week
Parts
WaterMark certified products installed to Australian standards
Records
Compliance certificate for regulated work, plus photos or drain footage if you want them
Finish
Everything tested in front of you, old parts taken away and the area left clean

Questions and answers

Hot Water Repairs and Replacement in Mulgrave: your questions

Why do I have no hot water?

On an electric cylinder it is usually a failed element, thermostat or tripped safety cut-out. On a heat pump it can be a fault in the compressor, fan, sensor or controls. We test the system and explain the fix.

Is it normal for the relief valve to drip?

A little water while the system heats is normal. Constant dripping or a steady flow usually means a worn valve, high mains pressure or a failed expansion valve, all of which we can fix.

Can a leaking hot water tank be repaired?

If the tank itself is leaking, it cannot be repaired and must be replaced. Turn off the power to the unit and close the cold inlet valve, then call us. Leaks from fittings and valves can usually be repaired.

Why do plumbers not recommend tankless water heaters?

It depends on the type and the home. Electric tankless units need a very large electrical supply that many houses do not have, and they can struggle to run more than one outlet at once. For most Mulgrave homes, a well-sized storage cylinder or heat pump is the more practical choice.

How long does a hot water system last?

Many electric storage cylinders last around ten to fifteen years, depending on water quality, usage and maintenance. Heat pumps vary by model. Regular checks and anode replacement can extend a tank's life.

Can you replace my hot water system the same day?

Often, yes, for a like-for-like electric replacement. Heat pumps may need a day or two to arrange the right unit and electrical connection.

What temperature should my hot water be?

Water should be stored at 60 degrees Celsius or more to control bacteria, and delivered to bathrooms at a lower, safer temperature through a tempering valve.

Do you remove the old hot water system?

Yes. We disconnect and take away the old cylinder and packaging when we install the new one.

Getting ready

Five ways to speed up our visit

  • Locate the meter Most Mulgrave meters sit near the front boundary, often under a small lid in the nature strip or garden bed. Units usually have a bank of meters near the driveway; check which one is yours.
  • Make room Clear cars from the driveway and move bins, boxes or bikes away from the laundry, hot water unit, toilet or drain openings we will need.
  • Tell us the pattern Which taps, drains or rooms are affected, when it began and whether anything changed recently, like a renovation, a new appliance or heavy rain.
  • Access and pets Mention locked side gates, dogs, intercoms, body corporate rules or loading-dock access for commercial sites.
  • Send a photo A picture of the leak, the hot water label or two meter readings taken an hour apart can save time and a second trip.

Free quote

Tell us about the job

Send a few details and a licensed Mulgrave plumber will phone you back. If water is escaping right now, call 03 9088 4762 instead.

03 9088 4762

We do not publish prices. We look at the job, explain the options and agree the cost with you before any work starts.







    How a job runs

    From your first call to the finished job

    1. 01
      Call or send the form

      Tell us what is happening, where it is and how urgent it feels. A phone photo of the problem, the hot water label or the meter helps us bring the right parts.

    2. 02
      Diagnose and price

      We test rather than guess, show you what we found and give you a fixed price for the fix. Nothing starts until you say yes.

    3. 03
      Do the work properly

      Repairs and installs follow the Plumbing Code of Australia and Victorian rules, with WaterMark certified parts and materials.

    4. 04
      Test and hand over

      We run everything with you, clean up, take the old parts and leave notes, photos and a compliance certificate when one applies.

    Where we work

    Mulgrave and the suburbs around it

    Our base is Mulgrave itself, between the Monash Freeway and Police Road. From here, Waverley Park and Wheelers Hill are a few minutes north and east, Glen Waverley is up Springvale Road, Clayton sits to the west, Springvale and Noble Park North are to the south and Dandenong North and Rowville are across Dandenong Creek to the east. If your street is nearby but not listed, ring 03 9088 4762 and ask.

    Mulgrave Plumbing

    Leak, blockage or no hot water? Talk to a local plumber now.