Bathroom renovations · Mulgrave VIC 3170
Bathroom Renovation Plumbing in Mulgrave
Updating a 1980s bathroom, adding an ensuite or reworking a laundry? We handle the plumbing from strip-out to final fit-off and work smoothly with your builder, waterproofer and tiler. Call 03 9088 4762.
Urgent calls answered · Mulgrave VIC 3170

Plumbing for every stage of a renovation
Planning and set-out
Before anything is demolished, we look at the existing layout, where the drains run and where water pipes enter the room. Moving a toilet or shower can be easy or difficult depending on the floor type and the position of the sewer. In Mulgrave brick veneers on concrete slabs, moving a floor waste may mean cutting the slab; in older homes on stumps, there is usually more flexibility under the floor. We tell you what is practical before you commit to a design.
Strip-out and capping
During demolition, we isolate and cap water pipes and drains so the rest of the house stays usable and nothing is damaged.
Rough-in
Rough-in is the plumbing that goes inside walls and floors before they are closed up: new water pipes, mixer bodies, toilet pans and cistern connections, basin and shower wastes, and floor wastes set to the right height and fall. We set heights to suit your chosen fixtures, so check your tapware and vanity specifications with us before rough-in.
Coordination with waterproofing
A good waterproofing job depends on wastes and penetrations being in the right place and properly sealed. We coordinate with your waterproofer so floor wastes, puddle flanges and pipe penetrations are ready for the membrane.
Fit-off
Once tiling is complete, we return to install taps, mixers, shower roses, basins, toilets, vanities and accessories, connect everything, test for leaks and make sure each fixture works properly.
Compliance
All work follows the Plumbing Code of Australia and Victorian regulations, with WaterMark certified products. You receive a compliance certificate when the job is finished.
Common Mulgrave bathroom upgrades
- Replacing a shower over bath with a walk-in shower.
- Converting a separate toilet and bathroom into one larger room.
- Adding an ensuite to the main bedroom in a 1970s or 80s brick veneer.
- Moving a laundry into a cupboard to free up space.
- Upgrading to wall-hung toilets and in-wall cisterns.
- Adding grab rails and accessible fixtures for older residents.
Units and body corporates
If you own a unit, check your owners corporation rules before renovating. Some changes to shared drains or water services need approval. We can provide plans and information to support your application.
Planning tips
– Choose fixtures early, because rough-in heights depend on them. – Keep the toilet near its current position if you want to control costs. – Think about where the hot water comes from; a long pipe run means a wait for hot water. – Allow for an isolation valve so the bathroom can be shut off without turning off the whole house. ## Accessible bathrooms
For older residents or anyone with limited mobility, we can plan a bathroom with a level-entry shower, a taller toilet, lever taps, thermostatic mixing and solid backing in the walls for grab rails.
Local knowledge
What we see in Mulgrave properties
Mulgrave grew quickly from the late 1960s, and most streets are lined with brick-veneer houses from the 1970s and 1980s, many now sharing their blocks with two or three newer units. Underneath them is heavy, reactive clay that swells in wet winters and shrinks in dry summers, which is hard on old earthenware sewer joints and on stormwater pipes laid before flexible fittings were common. Off Wellington Road in the north-east, the Waverley Park estate is far newer, with plastic pipe, tempering valves and pressure that often needs a limiting valve. Then there is the business precinct along Wellington and Ferntree Gully Roads, where offices, warehouses and food businesses need backflow testing and washroom work. Knowing which of those you are dealing with before we arrive is half the job.
What you get
Included with every bathroom renovation plumbing visit
- Diagnosis
- Camera, gauge, thermal imager or meter test chosen to suit the fault, with the result shown to you
- Price
- Agreed before any work, and written down for bigger jobs
- Who turns up
- A licensed, insured Victorian plumber who works in Mulgrave every week
- Parts
- WaterMark certified products installed to Australian standards
- Records
- Compliance certificate for regulated work, plus photos or drain footage if you want them
- Finish
- Everything tested in front of you, old parts taken away and the area left clean
Questions and answers
Bathroom Renovation Plumbing in Mulgrave: your questions
Can you move my toilet during a renovation?
Often yes, but on a slab it may mean cutting concrete. We check the sewer position and tell you what is practical before you finalise the design.
Do you coordinate with other trades?
Yes. We work with builders, waterproofers, tilers and electricians, and give clear set-out heights so everyone can plan around them.
Do I need a compliance certificate for bathroom plumbing?
Yes. Regulated plumbing work in Victoria requires a compliance certificate, which we provide when the job is complete.
How long does bathroom plumbing take?
Rough-in usually takes one to two days, and fit-off around a day, depending on the size and complexity of the room.
Guides
Before you call, read this
Getting ready
Five ways to speed up our visit
- Locate the meter Most Mulgrave meters sit near the front boundary, often under a small lid in the nature strip or garden bed. Units usually have a bank of meters near the driveway; check which one is yours.
- Make room Clear cars from the driveway and move bins, boxes or bikes away from the laundry, hot water unit, toilet or drain openings we will need.
- Tell us the pattern Which taps, drains or rooms are affected, when it began and whether anything changed recently, like a renovation, a new appliance or heavy rain.
- Access and pets Mention locked side gates, dogs, intercoms, body corporate rules or loading-dock access for commercial sites.
- Send a photo A picture of the leak, the hot water label or two meter readings taken an hour apart can save time and a second trip.
Free quote
Tell us about the job
Send a few details and a licensed Mulgrave plumber will phone you back. If water is escaping right now, call 03 9088 4762 instead.
We do not publish prices. We look at the job, explain the options and agree the cost with you before any work starts.
How a job runs
From your first call to the finished job
- 01Call or send the form
Tell us what is happening, where it is and how urgent it feels. A phone photo of the problem, the hot water label or the meter helps us bring the right parts.
- 02Diagnose and price
We test rather than guess, show you what we found and give you a fixed price for the fix. Nothing starts until you say yes.
- 03Do the work properly
Repairs and installs follow the Plumbing Code of Australia and Victorian rules, with WaterMark certified parts and materials.
- 04Test and hand over
We run everything with you, clean up, take the old parts and leave notes, photos and a compliance certificate when one applies.
More services
Other plumbing we do in and around Mulgrave
Where we work
Mulgrave and the suburbs around it
Our base is Mulgrave itself, between the Monash Freeway and Police Road. From here, Waverley Park and Wheelers Hill are a few minutes north and east, Glen Waverley is up Springvale Road, Clayton sits to the west, Springvale and Noble Park North are to the south and Dandenong North and Rowville are across Dandenong Creek to the east. If your street is nearby but not listed, ring 03 9088 4762 and ask.
Mulgrave Plumbing