Home › Backflow Prevention and Testing in Mulgrave

Backflow testing · Mulgrave VIC 3170

Backflow Prevention and Testing in Mulgrave

Testable backflow devices protect the drinking water supply and must be checked by an accredited plumber, usually every year. We test, service and replace backflow devices across the Mulgrave business precinct. Call 03 9088 4762.

Urgent calls answered · Mulgrave VIC 3170

Plumber recording results while testing a backflow prevention valve on the wall of a business park unit

What backflow is

Backflow happens when water flows the wrong way, from a property back into the drinking water network. It can be caused by a drop in mains pressure, such as a burst main nearby or heavy demand from a fire hydrant, or by a site's own pressure being higher than the mains. If that water has been in contact with chemicals, process equipment, irrigation, fire sprinklers or other hazards, it can contaminate the public supply.

Backflow prevention devices stop that from happening. They range from simple dual check valves on houses to testable reduced pressure zone devices on high-hazard commercial and industrial sites.

Who needs backflow testing

Under Victorian plumbing regulations and South East Water's requirements, sites with a testable backflow prevention device must have it inspected and tested by a licensed plumber with backflow accreditation, normally at least once a year. In Mulgrave, that commonly includes:

  • Offices and commercial buildings with fire services or boiling water units.
  • Warehouses and distribution centres with fire sprinklers and hose reels.
  • Factories and labs using chemicals or process water.
  • Food producers, cafes and restaurants.
  • Medical, dental and veterinary clinics.
  • Car washes, workshops and businesses with irrigation systems.
  • Schools, sporting clubs and community buildings.

What our test involves

  1. We locate and identify each device on site.
  2. We check the device is suitable for the hazard rating of the site.
  3. Using a calibrated test kit, we test each check valve and relief valve against the required standard.
  4. We record the results and lodge the test report as required.
  5. If a device fails, we explain why and quote for repair or replacement.

Servicing, repairs and replacements

Backflow devices contain springs, seals and valves that wear over time. Debris from the mains can lodge in them. When a device fails its test, it can often be repaired with a service kit. Older devices, or those no longer suited to the site's hazard rating, may need replacement. We also install new devices for fit-outs and change of use.

Never miss a test

We keep a record of each device we test and can remind you when the next annual test is due. That makes life easier for facility managers, property managers and business owners juggling multiple compliance dates.

Working around your operations

Testing usually requires a short shutdown of water to the device. We arrange a time that suits your business, often early in the morning or after hours, and keep downtime to a minimum. ## Rainwater tanks and irrigation

Homes and businesses with rainwater tanks connected to the mains top-up, or with large irrigation systems, may need extra backflow protection.

Local knowledge

What we see in Mulgrave properties

Mulgrave grew quickly from the late 1960s, and most streets are lined with brick-veneer houses from the 1970s and 1980s, many now sharing their blocks with two or three newer units. Underneath them is heavy, reactive clay that swells in wet winters and shrinks in dry summers, which is hard on old earthenware sewer joints and on stormwater pipes laid before flexible fittings were common. Off Wellington Road in the north-east, the Waverley Park estate is far newer, with plastic pipe, tempering valves and pressure that often needs a limiting valve. Then there is the business precinct along Wellington and Ferntree Gully Roads, where offices, warehouses and food businesses need backflow testing and washroom work. Knowing which of those you are dealing with before we arrive is half the job.

What you get

Included with every backflow prevention and testing visit

Diagnosis
Camera, gauge, thermal imager or meter test chosen to suit the fault, with the result shown to you
Price
Agreed before any work, and written down for bigger jobs
Who turns up
A licensed, insured Victorian plumber who works in Mulgrave every week
Parts
WaterMark certified products installed to Australian standards
Records
Compliance certificate for regulated work, plus photos or drain footage if you want them
Finish
Everything tested in front of you, old parts taken away and the area left clean

Questions and answers

Backflow Prevention and Testing in Mulgrave: your questions

How often does a backflow device need testing?

Testable devices generally need testing at least once a year, or more often if the water corporation requires it.

Who can test backflow devices?

A licensed plumber with backflow prevention accreditation and a calibrated test kit.

What happens if my device fails?

We explain the cause and quote for repair or replacement. Many devices can be repaired with a service kit.

Do houses need backflow testing?

Most homes have a non-testable dual check valve at the meter. Testing is usually needed only where a home has a higher hazard, such as certain irrigation or a rainwater tank connection.

Do you lodge the test results?

Yes. We record the results and lodge the report as required, and give you a copy for your records.

Getting ready

Five ways to speed up our visit

  • Locate the meter Most Mulgrave meters sit near the front boundary, often under a small lid in the nature strip or garden bed. Units usually have a bank of meters near the driveway; check which one is yours.
  • Make room Clear cars from the driveway and move bins, boxes or bikes away from the laundry, hot water unit, toilet or drain openings we will need.
  • Tell us the pattern Which taps, drains or rooms are affected, when it began and whether anything changed recently, like a renovation, a new appliance or heavy rain.
  • Access and pets Mention locked side gates, dogs, intercoms, body corporate rules or loading-dock access for commercial sites.
  • Send a photo A picture of the leak, the hot water label or two meter readings taken an hour apart can save time and a second trip.

Free quote

Tell us about the job

Send a few details and a licensed Mulgrave plumber will phone you back. If water is escaping right now, call 03 9088 4762 instead.

03 9088 4762

We do not publish prices. We look at the job, explain the options and agree the cost with you before any work starts.







    How a job runs

    From your first call to the finished job

    1. 01
      Call or send the form

      Tell us what is happening, where it is and how urgent it feels. A phone photo of the problem, the hot water label or the meter helps us bring the right parts.

    2. 02
      Diagnose and price

      We test rather than guess, show you what we found and give you a fixed price for the fix. Nothing starts until you say yes.

    3. 03
      Do the work properly

      Repairs and installs follow the Plumbing Code of Australia and Victorian rules, with WaterMark certified parts and materials.

    4. 04
      Test and hand over

      We run everything with you, clean up, take the old parts and leave notes, photos and a compliance certificate when one applies.

    Where we work

    Mulgrave and the suburbs around it

    Our base is Mulgrave itself, between the Monash Freeway and Police Road. From here, Waverley Park and Wheelers Hill are a few minutes north and east, Glen Waverley is up Springvale Road, Clayton sits to the west, Springvale and Noble Park North are to the south and Dandenong North and Rowville are across Dandenong Creek to the east. If your street is nearby but not listed, ring 03 9088 4762 and ask.

    Mulgrave Plumbing

    Leak, blockage or no hot water? Talk to a local plumber now.