Home › Water Pressure Problems in Mulgrave

Water pressure · Mulgrave VIC 3170

Water Pressure Problems in Mulgrave

A shower that barely trickles, taps that spit and bang, or pressure so high it wears out your tapware? We test water pressure and fix the cause across Mulgrave. Call 03 9088 4762.

Urgent calls answered · Mulgrave VIC 3170

Pressure limiting valve and gauge fitted after a water meter, plumber adjusting it with a wrench

Low water pressure

Signs

  • Weak showers, especially when another tap is running.
  • Slow-filling toilets, baths and washing machines.
  • Pressure that has dropped gradually over months or years.
  • Low pressure on the hot side only.

Common causes

  • Corroded or furred pipes. Older galvanised or narrow copper pipes can build up deposits inside, reducing flow.
  • A hidden leak. Water escaping from a broken pipe reduces pressure everywhere else.
  • A partly closed or faulty valve at the meter, or a failing pressure limiting valve.
  • Blocked aerators and shower heads. Debris and mineral build-up restrict flow at the outlet.
  • Hot water system issues. A failing tempering valve or blocked inlet strainer can reduce hot water flow.
  • Undersized pipes. Extensions added to an original small-bore system can leave far rooms short of water.

High water pressure

Signs

  • Taps that spit or splash when opened.
  • Banging pipes when taps or appliances shut off, called water hammer.
  • Relief valves on hot water systems that drip often.
  • Tapware, toilet valves and flexible hoses that wear out quickly.

Why it matters

Mains pressure in some parts of the area, including sections of Waverley Park, can be higher than modern tapware and appliances are designed for. Australian standards limit the pressure that should reach fixtures inside a home. Too much pressure stresses every joint, hose and valve and shortens their life.

How we test and fix pressure problems

We fit a pressure gauge to an outside tap or test point and measure static pressure with everything off, then the flow and pressure drop with fixtures running. That tells us whether the issue is supply, a restriction in the house or a leak.

  • For high pressure, we install a pressure limiting valve after the meter to bring pressure to a safe level for the whole property.
  • For water hammer, we check pipe clips, fit arrestors where needed and adjust pressure.
  • For low pressure, we clear aerators and strainers, check valves, look for leaks and, where pipes are corroded or undersized, replace sections to restore flow.
  • For hot water pressure issues, we service or replace tempering valves and inlet strainers.

Pressure limiting valves need checks too

A pressure limiting valve does not last forever. If pressure creeps up or drops after years of good performance, the valve may need servicing or replacing. We test and replace them as needed. ## Pressure and appliances

Washing machines, dishwashers and fridges have maximum pressure ratings, and high pressure can void some warranties.

Pressure in two-storey homes

Upstairs bathrooms naturally have slightly lower pressure than downstairs. If the difference is large, the pipes may be undersized or partly blocked.

Local knowledge

What we see in Mulgrave properties

Mulgrave grew quickly from the late 1960s, and most streets are lined with brick-veneer houses from the 1970s and 1980s, many now sharing their blocks with two or three newer units. Underneath them is heavy, reactive clay that swells in wet winters and shrinks in dry summers, which is hard on old earthenware sewer joints and on stormwater pipes laid before flexible fittings were common. Off Wellington Road in the north-east, the Waverley Park estate is far newer, with plastic pipe, tempering valves and pressure that often needs a limiting valve. Then there is the business precinct along Wellington and Ferntree Gully Roads, where offices, warehouses and food businesses need backflow testing and washroom work. Knowing which of those you are dealing with before we arrive is half the job.

What you get

Included with every water pressure problems visit

Diagnosis
Camera, gauge, thermal imager or meter test chosen to suit the fault, with the result shown to you
Price
Agreed before any work, and written down for bigger jobs
Who turns up
A licensed, insured Victorian plumber who works in Mulgrave every week
Parts
WaterMark certified products installed to Australian standards
Records
Compliance certificate for regulated work, plus photos or drain footage if you want them
Finish
Everything tested in front of you, old parts taken away and the area left clean

Questions and answers

Water Pressure Problems in Mulgrave: your questions

Why is my shower pressure so low?

Common causes include a blocked shower head, a failing tempering valve, corroded pipes or a hidden leak. A pressure test pinpoints the cause.

What is a pressure limiting valve?

A valve fitted after the water meter that reduces high mains pressure to a safe level for the whole property.

Why do my pipes bang?

Water hammer happens when flowing water stops suddenly. High pressure and loose pipes make it worse. We adjust pressure, secure pipes and fit arrestors.

Is high water pressure dangerous?

It can shorten the life of tapware, hoses and appliances and increase the risk of leaks and bursts.

Can low pressure be caused by a leak?

Yes. Water escaping from a hidden leak reduces pressure at your taps. A meter test is a quick way to check.

Getting ready

Five ways to speed up our visit

  • Locate the meter Most Mulgrave meters sit near the front boundary, often under a small lid in the nature strip or garden bed. Units usually have a bank of meters near the driveway; check which one is yours.
  • Make room Clear cars from the driveway and move bins, boxes or bikes away from the laundry, hot water unit, toilet or drain openings we will need.
  • Tell us the pattern Which taps, drains or rooms are affected, when it began and whether anything changed recently, like a renovation, a new appliance or heavy rain.
  • Access and pets Mention locked side gates, dogs, intercoms, body corporate rules or loading-dock access for commercial sites.
  • Send a photo A picture of the leak, the hot water label or two meter readings taken an hour apart can save time and a second trip.

Free quote

Tell us about the job

Send a few details and a licensed Mulgrave plumber will phone you back. If water is escaping right now, call 03 9088 4762 instead.

03 9088 4762

We do not publish prices. We look at the job, explain the options and agree the cost with you before any work starts.







    How a job runs

    From your first call to the finished job

    1. 01
      Call or send the form

      Tell us what is happening, where it is and how urgent it feels. A phone photo of the problem, the hot water label or the meter helps us bring the right parts.

    2. 02
      Diagnose and price

      We test rather than guess, show you what we found and give you a fixed price for the fix. Nothing starts until you say yes.

    3. 03
      Do the work properly

      Repairs and installs follow the Plumbing Code of Australia and Victorian rules, with WaterMark certified parts and materials.

    4. 04
      Test and hand over

      We run everything with you, clean up, take the old parts and leave notes, photos and a compliance certificate when one applies.

    Where we work

    Mulgrave and the suburbs around it

    Our base is Mulgrave itself, between the Monash Freeway and Police Road. From here, Waverley Park and Wheelers Hill are a few minutes north and east, Glen Waverley is up Springvale Road, Clayton sits to the west, Springvale and Noble Park North are to the south and Dandenong North and Rowville are across Dandenong Creek to the east. If your street is nearby but not listed, ring 03 9088 4762 and ask.

    Mulgrave Plumbing

    Leak, blockage or no hot water? Talk to a local plumber now.