Home › Leak Detection in Mulgrave

Leak detection · Mulgrave VIC 3170

Leak Detection in Mulgrave

A water bill that has jumped, a meter that moves with every tap off or a damp patch you cannot explain? We find hidden leaks in walls, under slabs and in front gardens across Mulgrave. Call 03 9088 4762.

Urgent calls answered · Mulgrave VIC 3170

Plumber scanning a hallway wall with a thermal camera that shows the line of a hidden pipe

Signs of a hidden leak

  • Your water bill is noticeably higher with no change in how you use water.
  • The meter dial moves when every tap, toilet and appliance is off.
  • Damp, bubbling paint or swollen skirting boards.
  • A musty smell or mould in a cupboard or room.
  • Warm spots on a tiled or concrete floor, which can mean a hot water pipe is leaking underneath.
  • A patch of lawn that stays green and soggy in dry weather.
  • The sound of running water when nothing is on.
  • Lower water pressure than usual.

Do a simple meter test first

Turn off every tap, toilet, washing machine, dishwasher, irrigation system and fridge water line. Write down the reading on the meter, including the small red dials. Wait an hour without using any water, then read it again. If the number has changed, there is a leak somewhere. If it has not, any leak is likely to be small or intermittent. Send us the two readings when you call; it helps.

How we find leaks

Isolate sections

We start by isolating parts of the system: the house from the garden service, hot from cold, inside from outside. A pressure gauge on each section tells us which one is losing pressure, narrowing the search.

Thermal imaging

A thermal camera shows temperature differences behind walls, floors and ceilings. A leaking hot water pipe shows up as a warm streak; a cold leak and the damp it causes show up as a cool patch. It does not see through walls, but it shows where to look.

Acoustic detection

Water escaping under pressure makes a sound. Sensitive ground microphones and listening tools pick up that sound through concrete, tiles and soil, pinpointing the loudest spot so we know exactly where to open up.

Moisture meters and inspection

Moisture meters confirm whether a wall or floor is wet and how far the damp has spread. We also check fixtures, taps, toilets and shower recesses, because a leak can come from a worn seal rather than a pipe.

Where leaks hide in Mulgrave homes

  • Under slabs. Many Mulgrave homes have copper hot water pipes laid in or under the slab. A pinhole in one can leak for months, showing only as a warm spot or a high bill.
  • In walls. Joints behind showers, basins and kitchen sinks, especially in older bathrooms.
  • Front garden water services. The pipe between the meter and the house can be damaged by tree roots or ground movement in reactive clay.
  • Toilets. A worn inlet or outlet valve can waste a surprising amount of water as it runs into the pan.
  • Irrigation. Buried lines and fittings that crack or get dug into.

After we find it

We show you where the leak is and give you options. Sometimes it is a simple joint repair. Sometimes it makes more sense to re-route a pipe through the roof or wall than to break up a slab. We agree the price before any work, then repair and pressure test the line. We can provide a written report for an insurer or for a water bill review with South East Water.

Local knowledge

What we see in Mulgrave properties

Mulgrave grew quickly from the late 1960s, and most streets are lined with brick-veneer houses from the 1970s and 1980s, many now sharing their blocks with two or three newer units. Underneath them is heavy, reactive clay that swells in wet winters and shrinks in dry summers, which is hard on old earthenware sewer joints and on stormwater pipes laid before flexible fittings were common. Off Wellington Road in the north-east, the Waverley Park estate is far newer, with plastic pipe, tempering valves and pressure that often needs a limiting valve. Then there is the business precinct along Wellington and Ferntree Gully Roads, where offices, warehouses and food businesses need backflow testing and washroom work. Knowing which of those you are dealing with before we arrive is half the job.

What you get

Included with every leak detection visit

Diagnosis
Camera, gauge, thermal imager or meter test chosen to suit the fault, with the result shown to you
Price
Agreed before any work, and written down for bigger jobs
Who turns up
A licensed, insured Victorian plumber who works in Mulgrave every week
Parts
WaterMark certified products installed to Australian standards
Records
Compliance certificate for regulated work, plus photos or drain footage if you want them
Finish
Everything tested in front of you, old parts taken away and the area left clean

Questions and answers

Leak Detection in Mulgrave: your questions

Can you find a leak without breaking walls or floors?

Usually we can pinpoint it closely enough that only a small, targeted opening is needed. Sometimes re-routing the pipe avoids opening up a slab at all.

Will South East Water reduce my bill if there was a hidden leak?

Water corporations may consider an allowance for a concealed leak that has been repaired by a licensed plumber. We provide the report and invoice you will need to apply.

How long does leak detection take?

Most residential leaks are found within a single visit. Larger or commercial properties can take longer.

What causes leaks under concrete slabs?

Ageing copper, ground movement in reactive clay and poor original installation are common causes.

Getting ready

Five ways to speed up our visit

  • Locate the meter Most Mulgrave meters sit near the front boundary, often under a small lid in the nature strip or garden bed. Units usually have a bank of meters near the driveway; check which one is yours.
  • Make room Clear cars from the driveway and move bins, boxes or bikes away from the laundry, hot water unit, toilet or drain openings we will need.
  • Tell us the pattern Which taps, drains or rooms are affected, when it began and whether anything changed recently, like a renovation, a new appliance or heavy rain.
  • Access and pets Mention locked side gates, dogs, intercoms, body corporate rules or loading-dock access for commercial sites.
  • Send a photo A picture of the leak, the hot water label or two meter readings taken an hour apart can save time and a second trip.

Free quote

Tell us about the job

Send a few details and a licensed Mulgrave plumber will phone you back. If water is escaping right now, call 03 9088 4762 instead.

03 9088 4762

We do not publish prices. We look at the job, explain the options and agree the cost with you before any work starts.







    How a job runs

    From your first call to the finished job

    1. 01
      Call or send the form

      Tell us what is happening, where it is and how urgent it feels. A phone photo of the problem, the hot water label or the meter helps us bring the right parts.

    2. 02
      Diagnose and price

      We test rather than guess, show you what we found and give you a fixed price for the fix. Nothing starts until you say yes.

    3. 03
      Do the work properly

      Repairs and installs follow the Plumbing Code of Australia and Victorian rules, with WaterMark certified parts and materials.

    4. 04
      Test and hand over

      We run everything with you, clean up, take the old parts and leave notes, photos and a compliance certificate when one applies.

    Where we work

    Mulgrave and the suburbs around it

    Our base is Mulgrave itself, between the Monash Freeway and Police Road. From here, Waverley Park and Wheelers Hill are a few minutes north and east, Glen Waverley is up Springvale Road, Clayton sits to the west, Springvale and Noble Park North are to the south and Dandenong North and Rowville are across Dandenong Creek to the east. If your street is nearby but not listed, ring 03 9088 4762 and ask.

    Mulgrave Plumbing

    Leak, blockage or no hot water? Talk to a local plumber now.